Description

NO MORE OVERFLOWS

MODEL B

This model has a 6 foot cord and a light that indicates power is “ON”.  It is primarily used where outlets cannot be seen, as is common in Apartments and Condos where outlets may be hidden behind the washing machine. In addition, This usually means that the outlet is not a GFCI. When using this model, a GFCI circuit protector must be in use (or installed) in the electrical panel of the condo/apartment. When a potential overflow occurs and the NO MORE OVERFLOWS unit stops the electricity to the washer, the power light on the NMO-B will go off – indicating that the system prevented an overflow, and the GFCI breaker must be reset to restore power.

Installation of Model NMO-B takes just a couple of minutes and requires no tools. Plug in the NMO-B into a GFCI protected outlet. Adhere the control box to the wall with the provided Velcro strips. Insert the probe into the top of the drain. next to (not beneath) the washer drain hose. THAT’S IT!*

*If you do not have a GFCI breaker in your electrical panel you may have to ask a professional to install one. NOTE: A GFCI Breaker is a special breaker switch and not the standard breaker found in most electrical panels. You must use a GFCI breaker with a NMO-B system.